Ontario G1 overview

Ontario G1: Pavement markings

Yellow and white lines, solid and broken lines, continuity lines, stop lines, crosswalks, lane arrows, pedestrian crossovers and markings around obstacles.

  • 20 questions
  • Topic drill
0/20
Pavement markings · Question 1Score 0/0

What does a stop line look like?

Study reference: MTO Driver's Handbook (online edition, 2026), Ch. 3 Traffic signs and lights — Pavement markings

All 20 questions in this test

Every question and its answer choices. The correct answers and explanations appear when you take the test above.

  1. What does a stop line look like?

    1. A single white line across the road
    2. Two parallel white lines across the road
    3. A white X painted in each lane
    4. A single yellow line across the road
  2. A white arrow pointing straight ahead is painted in your lane. What does it mean?

    1. The lane is one-way for buses
    2. You may go straight or turn right
    3. You may only go straight ahead
    4. Going straight is only suggested
  3. Continuity lines run along the right side of your lane near an off-ramp. What does that tell you?

    1. You must change lanes right away
    2. Your lane will continue unaffected
    3. Your lane is about to exit
    4. You must slow to the ramp speed
  4. Besides lines on the pavement, how are fixed objects like bridge piers marked as a warning?

    1. With yellow and black markings
    2. With red and white markings
    3. With green reflective paint
    4. With orange and white stripes
  5. Two solid lines on the pavement curve around a concrete island ahead. What are they for?

    1. Marking a parking area
    2. Guiding traffic away from the object
    3. Showing a passing zone
    4. Marking a pedestrian crossing at the island
  6. Are crosswalks at intersections always painted on the road?

    1. Yes, unless it is a rural road
    2. No, some are not marked
    3. Yes, every one is painted
    4. No, only school crossings are
  7. There is a solid line along the left side of your lane. What does it mean?

    1. It is unsafe to pass
    2. You may pass if it is clear
    3. You must turn left soon
    4. Your lane is ending ahead
  8. You must stop at an intersection with no stop line and no crosswalk, but there is a sidewalk. Where do you stop?

    1. At the edge of the intersection
    2. In the middle of the sidewalk
    3. Three metres past the sidewalk
    4. At the edge of the sidewalk
  9. What do yellow lines painted on the road separate?

    1. Traffic moving in the same direction
    2. Traffic moving in opposite directions
    3. Parking spaces from travel lanes
    4. Bicycles from motor vehicles
  10. You are thinking of passing on a broken line, but the line becomes solid a short way ahead. What must you judge?

    1. Whether the car ahead waves you on
    2. Whether oncoming drivers flash their lights
    3. Whether you can finish before it turns solid
    4. Whether you can pass faster than the limit
  11. A pedestrian has started across the road at a pedestrian crossover. When may you drive on?

    1. When they pass the middle of the road
    2. When they have completely crossed the road
    3. When they reach the next lane over
    4. When they have cleared your lane
  12. You are riding a bicycle and someone is using a pedestrian crossover ahead. What must you do?

    1. Ring your bell and keep going
    2. Yield only if you are on the road
    3. Stop before the line and yield
    4. Ride around the person slowly
  13. You are on a multi-lane road and the lanes beside you are divided by white lines. What does that tell you?

    1. Those lanes are reserved for buses
    2. Traffic in those lanes moves opposite ways
    3. Traffic in those lanes moves the same way
    4. You may never change lanes there
  14. The line on the left of your lane is broken. When may you pass?

    1. Only after sounding your horn
    2. At any time, even on a hill
    3. When the way ahead is clear
    4. Only once the line turns solid
  15. How is a marked crosswalk shown on the road?

    1. One white line across the road
    2. Two parallel white lines across the road
    3. Two parallel yellow lines across the road
    4. A white X in each lane
  16. What are continuity lines?

    1. Wider broken lines spaced closer together
    2. Narrow broken lines spaced far apart
    3. A single solid line across the lane
    4. Two solid lines side by side
  17. You must stop at an intersection that has no stop line, but there is a crosswalk. Where do you stop?

    1. Wherever you can see cross traffic
    2. At the crosswalk
    3. Past the crosswalk, at the curb line
    4. At the edge of the intersection
  18. Which pavement pattern marks the traditional overhead-lit pedestrian crossover illustrated in the handbook?

    1. Two yellow lines with a diamond
    2. One white stop line with lane arrows
    3. Double white lines with an X in each lane
    4. Yellow zigzag lines along the curb
  19. The handbook illustrates a crossover with double white lines and Xs on the road. Which equipment accompanies that layout?

    1. Full traffic lights and a painted stop line
    2. Specific signs and overhead yellow lights
    3. Flashing red beacons and a gate
    4. A crossing guard at all times
  20. Near an interchange, you see continuity lines on the left side of your lane. What does this generally mean?

    1. Your lane is ending or exiting
    2. You may pass on the right only
    3. Your lane continues unaffected
    4. A bus lane begins just ahead

Pavement markings: key rules to remember

Our summary of what the official handbook says on this topic, in our own words. Read it before or after the practice questions above, then check the original chapter. Read the official chapter ↗

Introduction

  • Markings work with signs and lights: they divide lanes, show turning lanes, mark pedestrian crossings, flag obstacles and show where passing is unsafe.

Diagram 3-1 (yellow and white lines)

  • Yellow lines separate traffic going in opposite directions.
  • White lines separate traffic going in the same direction.

Diagram 3-2 (solid line)

  • Solid line on the left of your lane = passing is unsafe.

Diagram 3-3 (broken line)

  • Broken line on the left of your lane = you may pass if the way is clear, and only if enough broken line remains ahead to finish the pass safely.

Diagram 3-4 (continuity lines)

  • Continuity lines = broken lines that are wider and closer together than normal broken lines.
  • On your left: generally your lane is ending or exiting; change lanes to keep going the same direction.
  • On your right: your lane continues unaffected.

Diagram 3-5 (stop line)

  • Stop line = one white line across the road at an intersection; it marks where to stop.
  • No stop line → stop at the crosswalk (marked or not) → no crosswalk → edge of sidewalk → no sidewalk → edge of intersection.

Diagram 3-6 (crosswalk)

  • Marked crosswalk = two parallel white lines across the road.
  • Crosswalks at intersections are not always marked. Same stopping order as above.

Diagram 3-7 (lane arrows)

  • White arrow painted in a lane: you may move only in the arrow's direction.

Diagram 3-8 (pedestrian crossover)

  • Identified by specific signs, overhead yellow lights and pavement markings.
  • Markings: two sets of white double parallel lines across the road, with an X in each approaching lane.
  • Drivers AND cyclists stop before the line and yield until pedestrians have completely crossed and cleared the roadway.

Diagram 3-9 (markings around objects)

  • Two solid lines guide traffic away from fixed objects (e.g. bridge piers, concrete islands).
  • The objects themselves carry yellow and black warning markings.

Study the Pavement markings rules as flashcards →

Other topics

Full practice tests