You face a solid red light and there is no stop line or crosswalk. Where do you stop?
Alberta Class 6: Traffic lights and signals
Solid, flashing and arrow lights, turns on a red light, pedestrian signals, lane reversal signals and flashing yellow beacons.
- No sign-up
- Every answer explained
- Independent · not a government site
- 15 questions
- Topic drill
Study reference: Driver's Guide (Spring 2026), Ch. 2 Traffic Control — Traffic control signals, Pedestrian signals, Lane reversal signals, pp. 22–24
All 15 questions in this test
Every question and its answer choices. The correct answers and explanations appear when you take the test above.
You face a solid red light and there is no stop line or crosswalk. Where do you stop?
- Beside the traffic light pole
- Before entering the intersection
- Halfway into the intersection
- At the far side of the intersection
May you turn right on a red light in Alberta?
- No, never on a red light
- Only when a green arrow is also lit
- Yes, without a full stop, if no traffic or pedestrians are coming
- Yes, after a full stop and yielding, unless a sign forbids it
A school crossing sign has yellow lights flashing on it. What must you do?
- Slow to 50 km/h and watch for children
- Sound your horn and continue
- Stop and wait until the lights stop
- Slow to 30 km/h and yield to pedestrians
You face a red light with a green arrow pointing right. What may you do?
- Wait for the full green light
- Turn right in the arrow's direction
- Turn left after yielding
- Go straight through carefully
Above your lane, a lane reversal signal shows a red X. What does it mean?
- You may use the lane with care
- The lane is closed for 1 km
- Do not ride in that lane
- The lane is for turning only
A police officer is directing traffic at an intersection where the light is green for you. The officer signals you to stop. What do you do?
- Turn right to avoid the officer
- Stop only if cross traffic is coming toward you
- Go, because the light is green
- Stop and follow the officer's direction
What does a flashing yellow light at an intersection mean?
- Stop and wait for a green light
- Go with caution, yielding to anyone in the intersection
- Only traffic turning right may proceed, after a full stop
- The light is about to turn red
What is a stale green light?
- A green light with a broken bulb
- A green that has been on for a while and may soon change
- A green light that has just turned on after a long red phase
- A green light that is flashing
On a vertical traffic light, in what order are the colours from top to bottom?
- Red, yellow, green
- Green, yellow, red
- Yellow, red, green
- Red, green, yellow
The light turns yellow as you approach. You can stop safely before the line. What should you do?
- Continue at the same speed
- Stop before the stop line
- Speed up to clear the intersection
- Stop in the middle of the crosswalk
When is a left turn on a red light permitted?
- From a one-way street onto a one-way street, after a stop
- From any street when no one is coming
- Only from a two-way street onto a one-way street
- Never, under any circumstances
A warning sign before a signal has its own yellow lights flashing. What does this tell you?
- A school zone is starting
- The signal ahead is out of order and works as a four-way stop
- Be ready to stop; the light ahead is changing or red
- You have a green light ahead
In Alberta, a flashing green light allows you to:
- Go only after stopping first
- Go straight, left or right without stopping
- Go straight only, with no turns
- Turn left only, after yielding to oncoming traffic
A pedestrian is halfway across when the DON'T WALK signal appears. What should the pedestrian do?
- Finish crossing
- Wait in the crosswalk for WALK
- Stop on the centre line
- Return to the starting curb
What must you do at a flashing red light?
- Stop only if traffic is coming
- Slow down and continue with caution
- Stop completely, then go when it is safe
- Wait until the light turns green
Traffic lights and signals: key rules to remember
Our summary of what the official handbook says on this topic, in our own words. Read it before or after the practice questions above, then check the original chapter. Read the official chapter ↗
Driver's Guide (Spring 2026), Ch. 2 Traffic Control, pp. 22–24 (from our Class 7 notes)
- Vertical: red top, yellow centre, green bottom.
- Solid red: stop before stop line, else crosswalk, else intersection. Right on red allowed after full stop and yielding unless a sign prohibits. Left on red only one-way onto one-way after a full stop.
- Solid yellow: stop unless too close to stop safely; if in the intersection, clear it.
- Solid green: go; yield to oncoming traffic when turning left and to pedestrians when turning.
- Stale green: been green a while; pedestrian WALK = will stay green; DON'T WALK = be ready to stop.
- Green arrow with red: go only in arrow direction. Green arrow with green: arrow direction without yielding.
- Flashing red = stop sign; all-way flashing red = four-way stop.
- Flashing yellow: proceed with caution, yield to pedestrians and vehicles in the intersection.
- Flashing green (Alberta): go straight, left or right without stopping; opposing traffic has red; still yield to those lawfully in the intersection.
- Pedestrian WALK: may enter; DON'T WALK: don't start; those already crossing finish.
- Flashing yellow lights on school/playground/pedestrian signs: max 30 km/h and yield to pedestrians (p. 24).
- Lane reversal signals: red X = do not use that lane; green downward arrow = may use (p. 24).
- Warning sign with flashing yellow before signals: light ahead is changing or red (p. 33).
- Peace officer directions override signals (p. 58).
Other topics
- Road signsSign shapes and colours, regulatory, permissive and prohibitive signs, warning signs, school and playground zones, and construction signs.
- Pavement markingsYellow and white lines, passing zones, two-way left-turn lanes, diamonds, painted islands, bicycle lanes, crosswalks and stop lines.
- Class 6 licensing and GDLLearning to ride, supervisors, Class 7 learner riding conditions, the knowledge and road tests, Class 6-GDL conditions, exiting GDL, mopeds and power bicycles.
- Helmets and protective gearApproved helmet standards, helmet types and fit, eye and face protection, jackets, pants, boots, gloves and hearing protection.
- Rider fitness and distractionsHypothermia, overheating and dehydration, alcohol, drugs and medication, fatigue, cell phones and other distractions.
- Controls and pre-ride inspectionChoosing a motorcycle that fits, learning the controls, the pre-trip inspection checklist and seasonal storage.
- Riding position, gears and parkingRiding position, starting, signalling, the clutch and friction zone, shifting gears, starting on a hill and parking.
- Braking, traction and stopping distanceTires and traction, using the front and rear brakes, threshold braking, and perception, reaction and braking distance.
- Turns, curves and skidsTurning at low speed, push-steering (counter-steering) through curves, and avoiding and recovering from skids.
- Lane position, space and being seenBlind spots, the space cushion, following distance, choosing a lane and lane position, and changing lanes.
- Intersections and passingLane position at intersections, a stalled motorcycle, passing emergency vehicles, when not to pass, passing on a two-lane highway and being passed.
- Night, weather and road surfacesRiding at night and in fog, wind and temperature extremes, hydroplaning, gravel, ice, metal gratings and railway tracks.
- Riding emergenciesEmergency braking, swerving around and riding over obstacles, a stuck throttle, wobble, tire blowouts, airborne objects and animals.
- Passengers, cargo and three-wheelersCarrying a passenger legally and safely, loading cargo, towing a trailer, three-wheeled motorcycles and sidecars.
- Group ridingGroup size, the staggered formation and following times, the lead rider's position, passing and changing lanes as a group, and single file.
- Sharing the roadPedestrians, cyclists, large trucks, school buses, snowplows, railway crossings and LRT, from Alberta's Driver's Guide.
- Demerits, impaired riding and penaltiesDemerit point limits for GDL and full licence holders, common demerit values, impaired driving limits and Alberta's Immediate Roadside Sanctions.