Forklift Operator exam simulator

A new random set of questions every time, in the test format, with no hints until you submit.

No sign-up
Every answer explained
Independent · not a government site

40 questions
untimed
Pass mark 32/40

Before you start

Questions: 40, drawn at random from 171
Time limit: Untimed (a clock shows the time you have used)
To pass: 32 correct out of 40

Not confirmed by an official source: Written test format. For these, the simulator uses the same practice standard as our mock exams.

How the simulator works

Every attempt draws a new random set, so a retake is never the same test.
No explanations or right answers appear until you submit.
Move freely between questions, change answers and flag any you want to check again.
There is no time limit; the clock only shows how long you have taken.
Keyboard: 1–4 or A–D to answer, ← → to move, F to flag.

Find a quiet spot. If you leave the page during the test, you will be asked to confirm.

Your last attempts

Your last five results will appear here. They are saved on this device only.

What the real test is like

Facts from official sources, each with the page it comes from.

Official exam
No central government forklift exam; the employer must establish that each operator is competent, usually through training and a practical evaluation
Ontario lift truck guideline — Competency
Who may operate (Ontario)
Only a competent person, or a worker being instructed who is accompanied by a competent person
Ontario Regulation 851, s. 51(2)
Training standard (B.C.)
Lift truck operator training must meet Clause 6 of CSA B335-15
WorkSafeBC OHS Regulation, s. 16.43
Retraining (Manitoba)
Certified operators should be retrained at intervals not exceeding three years
Manitoba Code of Practice for the Safe Operation of Powered Lift Trucks
Load-capacity examination (Ontario)
A competent person examines the truck's ability to handle its rated load before first use and at least once a year, with a signed record
Ontario Regulation 851, s. 51(1)(b)
Pre-shift inspection (B.C.)
The operator inspects the equipment before it is first used on a shift; reported defects are recorded and kept for at least 2 years
WorkSafeBC OHS Regulation, s. 16.3

FAQ

Exam simulator FAQ

How is the simulator different from the mock exams?

Each mock exam is a fixed set of questions, so you can repeat it and compare scores. The simulator draws a new random set of 40 questions from our 171-question bank every time, in the same format, with no site menus, ads or hints on screen.

Are these the real Forklift Operator test questions?

No. Every question is original and written from the official study guide, and each answer names the section it comes from. This is a practice simulation, not the official test, and it is not affiliated with the official test provider (Ontario Ministry of Labour, Immigration, Training and Skills Development — Guideline for the Safe Operation and Maintenance of Powered Lift Trucks).

Is the simulator timed?

No. Our official sources for this test do not give a time limit, so the simulator is untimed. A clock shows how long you have taken, and your time appears with your result.

How is the simulation marked?

You need 32/40 to pass. After you submit, you see your score by section and by topic, then every question with your answer, the right answer and an explanation.

Can I go back and change my answers?

Yes. Until you submit, you can move between questions, change any answer and flag questions to check again. The question map shows which ones are answered, flagged or still empty. The official test may work differently, so check with the official test provider (Ontario Ministry of Labour, Immigration, Training and Skills Development — Guideline for the Safe Operation and Maintenance of Powered Lift Trucks).