A person at a scheduled stop offers the fare. When may you refuse to carry them?
Manitoba Commercial: Driving a bus and passenger safety (Class 2 and 4)
Bus right and left turns, leaving the curb, parked-vehicle clues, passenger safety, interior lights, defects and breakdowns, fuelling, baggage, loading passengers, the driver's vision, standing passengers and refusing passage.
- No sign-up
- Every answer explained
- Independent · not a government site
- 14 questions
- Topic drill
Study reference: MPI Professional Driver's Manual (PDF, Dec. 2025), Ch. 4 Additional information for Class 2 and Class 4 drivers — Driving a bus, Passenger safety, Loading and unloading passengers
All 14 questions in this test
Every question and its answer choices. The correct answers and explanations appear when you take the test above.
A person at a scheduled stop offers the fare. When may you refuse to carry them?
- When they are carrying a large bag or a suitcase
- When all seats are full, or they are disorderly
- When they want to stand
- When the bus is running late
What is the bus driver's first consideration?
- Collecting every fare
- Passenger entertainment
- Safe operation of the vehicle
- Keeping to the published schedule
How must baggage be carried on a public passenger vehicle?
- Only on the roof of the vehicle
- Beside the driver for supervision
- So it cannot block exits or fall on passengers
- Stacked in the aisle for quick access
Passing a line of parked cars, which clue warns that one may pull out?
- A parking ticket on the window
- Exhaust coming from its tailpipe
- A clean windshield
- Its headlights being off
For a sharp right turn with a bus, how far from the curb should you position on the approach?
- Right against the curb
- Three to four metres
- One to two metres
- In the middle of the left lane
Which practice causes preventable passenger injuries on buses?
- Turning slowly at intersections
- Sudden stops or starts with standees
- Stopping close to the curb at a loading zone
- Closing the doors before moving
Before leaving the curb with a bus, what should you do besides checking the side mirror?
- Glance over your left shoulder
- Open the door to look back
- Sound the horn twice
- Flash your four-way lights
Why must you take care pulling away from the curb in a bus with rear overhang?
- The rear doors may open while turning
- The overhang drags on the road surface as you pull out
- The overhang can swing into poles or people
- The rear wheels may lift off the road
Turning left with a bus, when do you begin turning?
- As soon as the front wheels pass the stop line at the corner
- When the cross street's curb shows in the front left window
- When the rear wheels reach the crosswalk
- When oncoming traffic slows for you
Where may passengers not sit while you drive?
- To the left of the driver
- Beside a window
- At the rear of the bus
- In the first row behind the driver
A visually impaired passenger boards with a guide dog. What applies?
- Animals are never allowed on buses
- The dog must ride in the baggage compartment
- The dog may board only if muzzled
- The licensed animal may ride with them
Outside a city, where should a bus stop to load or unload passengers if possible?
- Right at a railway crossing
- On the opposite side of the road
- Clear of the travelled part of the highway
- In the centre of the driving lane, with flashers on
A defect develops mid-trip that makes it unsafe to continue. What should the bus driver do?
- Finish the route as planned and report it afterward
- Drive slower and keep the passengers aboard
- Stop, and not carry on with passengers until fixed
- Ask the passengers to vote on continuing
What is required when refuelling a public passenger vehicle?
- Passengers seated with windows closed
- Engine running so passengers stay warm
- The nozzle held just above the opening
- Engine off, nozzle kept in contact and grounded
Driving a bus and passenger safety (Class 2 and 4): key rules to remember
Our summary of what the official handbook says on this topic, in our own words. Read it before or after the practice questions above, then check the original chapter. Read the official chapter ↗
Ch. 4 Driving a bus (pp. 87–88)
- Right turns: avoid scuffing the curb with the rear wheels; for a sharp turn approach 1 to 2 m from the curb and go straight until the side street's curb line shows through the front door.
- Very narrow streets may require going well into the intersection, even over the centre line, with extreme caution.
- Left turns: start from the left lane about one metre from the centre line or median; go straight until the intersecting curb line shows in the front left window; finish in the left lane.
- Leaving the curb: check the mirror and glance over your left shoulder; signal only when ready to leave; watch the rear overhang near poles, signs and pedestrians.
- Parked-vehicle clues: wheels turned out, driver at the wheel, exhaust, brake lights, signal lights.
Ch. 4 Passenger safety (p. 88)
- Safe operation comes before schedules; Class 2 and 4 drivers must also consider passenger comfort.
- Know your bus's turning radius, off-track, rear overhang and width.
- Preventable passenger collisions: stopping improperly at the zone, loading when unsafe, sudden stops or starts with standees, fast sharp turns, misuse of doors.
- Public passenger vehicles need interior lights for the whole interior and a lamp at each entrance door; keep them clean and sanitary.
- If a defect makes it unsafe or uncomfortable to continue, stop and do not continue with passengers until it is fixed; after a breakdown or collision, arrange transport for passengers right away.
- Do not refuel with the engine running or near an open flame; keep the nozzle in contact and grounded.
- Baggage must not block entrances or exits and must be stowed so it cannot fall on passengers.
Ch. 4 Loading and unloading passengers (p. 89)
- Outside a city, stop clear of the travelled road where possible when loading or unloading.
- Do not collect fares, make change or load or unload while moving; avoid unnecessary conversation.
- The driver's view ahead and to both sides must not be blocked; no passenger may sit to the driver's left; a sedan may seat at most two passengers on the front seat.
- No standing passenger may block the driver's vision or movements.
- A person at a scheduled stop with the fare may be refused only if all seats are full, or if intoxicated, boisterous, disorderly or using profane or obscene language.
- A licensed animal such as a guide dog may accompany a person with a disability.
Study the Driving a bus and passenger safety (Class 2 and 4) rules as flashcards →
Other topics
- Licence classes, testing and medical rulesWhat Class 1 to 4 licences allow in Manitoba, minimum age and Class 5 stage needed, Authorized Instruction and supervising drivers, MELT, knowledge and road test rules, medical and vision standards, US commercial driving and the air brake endorsement.
- Impairment, fatigue and safety equipmentImpaired driving sanctions, carbon monoxide, emotions, fatigue and sleep debt, hours of service, airbags and seatbelts, distractions, warning reflectors, fire fighting and extinguishers.
- Fuel-smart driving, night driving and vehicle controlsFuel efficiency habits, starting and warming up, night driving distances and dimming, hand position, clutch and double-clutching, engine rpm and gear changes, shifting before hills, curves and railway crossings, lane use.
- Speed, following distance and brakingSpeed, weight and stopping force, the danger zone, the four-second rule and length-based count, traffic tempo, tailgaters, the 90 m rule, slow-moving vehicles, snubbing and control speed, retarders, ABS and runaway lanes.
- Tires, wheels, passing and intersectionsTread depth limits, retreads, tire pressure and heat, wheel fasteners and failures, passing and being passed, lane changes, curves and intersection rules for large vehicles.
- Backing, parking and railway crossingsBacking rules and guides, leaving alleys and lanes, securing an unattended vehicle, and Manitoba railway crossing distances, prohibitions and when you may cross with lights flashing.
- Weather, winter roads, skids and jackknifingIce and snow, reduced visibility, black ice, Manitoba winter and ice roads, strong winds, hydroplaning, wet brakes, the causes of skids, skid recovery and jackknifing.
- Trip inspections and road test vehicle rulesWho must do a daily trip inspection, what the report contains, major and minor defects, the road test inspection and vehicle requirements, tread, mud flap and reflective tape rules, hydraulic brake checks, in-service, post-trip and pre-hill inspections.
- Turning, backing and coupling (Class 1 and 3)Off-tracking, right and left turns with button hook, extended approach and lane straddling, backing a tractor-trailer, the Class 1 straight line backing test, draw-bar rules, and Manitoba's coupling and uncoupling steps.
- Dimensions, weights and loads (Class 1 and 3)Height, width and length limits, permits, utility approvals, escort and pilot vehicles, weight rules and spring restrictions, weigh stations, load distribution, securement, projections, night oversize lights and farm equipment.
- Dangerous goods, special loads, highway trains and tow trucksDangerous goods duties, classes and placards, documents and spill reporting, livestock, hanging meat, bulk and tank loads, highway trains and rear amplification, and tow truck rules.
- Buses, school buses and emergency vehicles (Class 2 and 4)Which licence class each bus and school bus needs, school bus stops at railway crossings, emergency vehicle exemptions and duties, and the extra trip inspection items for buses.
- Air brake basics and the air supplyThe air brake endorsement and learner rules, how air brakes differ from hydraulic brakes, the compressor and governor, normal pressure range, supply and dual tanks, draining, air dryer, alcohol evaporator, gauges, safety valve and low-pressure warnings.
- Service brakes and spring brakesThe brake pedal and dual circuits, brake chambers, pushrod stroke and adjustment limits, who may adjust brakes, spring brake chambers, caging, the yellow parking control, automatic spring application and DD3 chambers.
- Trailer brake subsystemSupply and service lines, gladhands and colour codes, cross-connected lines, the trailer hand valve, the red trailer supply valve, the tractor protection valve and system, automatic trailer spring brakes and spring or service brake priority.
- Foundation brakes, brake demands and complianceS-cam, disc and wedge brakes, how speed and weight change stopping distance, brake heat and fade, why adjustment matters, ABS, and the law on operating vehicles with defects.
- Air brake inspections, tests and brake adjustmentInspecting linings, chambers, drums, lines, tanks and compressors, the low air warning, build-up, governor, leak, tractor protection and spring brake tests, tug tests, draining, measuring pushrod stroke, long-stroke chambers and the S endorsement.